T1599: Network Boundary Bridging
Adversaries may bridge network boundaries by compromising perimeter network devices or internal devices responsible for network segmentation. Breaching these devices may enable an adversary to bypass restrictions on traffic routing that otherwise separate trusted and untrusted networks.
Devices such as routers and firewalls can be used to create boundaries between trusted and untrusted networks. They achieve this by restricting traffic types to enforce organizational policy in an attempt to reduce the risk inherent in such connections. Restriction of traffic can be achieved by prohibiting IP addresses, layer 4 protocol ports, or through deep packet inspection to identify applications. To participate with the rest of the network, these devices can be directly addressable or transparent, but their mode of operation has no bearing on how the adversary can bypass them when compromised.
When an adversary takes control of such a boundary device, they can bypass its policy enforcement to pass normally prohibited traffic across the trust boundary between the two separated networks without hinderance. By achieving sufficient rights on the device, an adversary can reconfigure the device to allow the traffic they want, allowing them to then further achieve goals such as command and control via Multi-hop Proxy or exfiltration of data via Traffic Duplication. Adversaries may also target internal devices responsible for network segmentation and abuse these in conjunction with Internal Proxy to achieve the same goals. In the cases where a border device separates two separate organizations, the adversary can also facilitate lateral movement into new victim environments.
How it's found
Detection Strategy for Network Boundary Bridging: From a defender’s perspective, suspicious bridging is observed when network devices begin allowing traffic that contradicts existing segmentation or access policies. Observable behaviors include sudden modifications to ACLs or firewall rules, unusual cross-boundary traffic flows (e.g., east-west communications across separated VLANs), or simultaneous ingress/egress anomalies. Multi-event correlation is key: configuration changes on a router/firewall followed by unexpected traffic patterns, especially from unusual sources, is a strong indicator of compromise.
Sub-techniques
T1599.001: Network Address Translation Traversal
Adversaries may bridge network boundaries by modifying a network device’s Network Address Translation (NAT) configuration. Malicious modifications to NAT may enable an adversary to bypass restrictions on traffic routing that otherwise separate trusted and untrusted networks. Network devices such as routers and firewalls that connect multiple networks together may implement NAT during the process of passing packets between networks. When performing NAT, the network device will rewrite the source and/or destination addresses of the IP address header. Some network designs require NAT for the packets to cross the border device. A typical example of this is environments where internal networks make use of non-Internet routable addresses. When an adversary gains control of a network boundary device, they may modify NAT configurations to send traffic between two separated networks, or to obscure their activities. In network designs that require NAT to function, such modifications enable the adversary to overcome inherent routing limitations that would normally prevent them from accessing protected systems behind the border device. In network designs that do not require NAT, adversaries may use address translation to further obscure their activities, as changing the addresses of packets that traverse a network boundary device can make monitoring data transmissions more challenging for defenders. Adversaries may use Patch System Image to change the operating system of a network device, implementing their own custom NAT mechanisms to further obscure their activities.
Standards mapping
Where this fits in a TurboPentest engagement
This weakness is not covered by the automated black-box pentest. IntegSec pentesters cover it in a manual engagement.
Frequently asked questions
What is T1599 Network Boundary Bridging?
Adversaries may bridge network boundaries by compromising perimeter network devices or internal devices responsible for network segmentation. Breaching these devices may enable an adversary to bypass restrictions on traffic routing that otherwise separate trusted and untrusted networks. Devices such as routers and firewalls can be used to create boundaries between trusted and untrusted networks. They achieve this by restricting traffic types to enforce organizational policy in an attempt to reduce the risk inherent in such connections. Restriction of traffic can be achieved by prohibiting IP addresses, layer 4 protocol ports, or through deep packet inspection to identify applications. To participate with the rest of the network, these devices can be directly addressable or transparent, but their mode of operation has no bearing on how the adversary can bypass them when compromised. When an adversary takes control of such a boundary device, they can bypass its policy enforcement to pass normally prohibited traffic across the trust boundary between the two separated networks without hinderance. By achieving sufficient rights on the device, an adversary can reconfigure the device to allow the traffic they want, allowing them to then further achieve goals such as command and control via Multi-hop Proxy or exfiltration of data via Traffic Duplication. Adversaries may also target internal devices responsible for network segmentation and abuse these in conjunction with Internal Proxy to achieve the same goals. In the cases where a border device separates two separate organizations, the adversary can also facilitate lateral movement into new victim environments.
Which tactics does T1599 belong to?
T1599 maps to the Defense Impairment tactic.
Does TurboPentest test for Network Boundary Bridging?
This weakness is not covered by the automated black-box pentest. IntegSec pentesters cover it in a manual engagement.
Related MITRE ATT&CK techniques
- Persistence, Defense ImpairmentT1112: Modify Registry
- Defense ImpairmentT1207: Rogue Domain Controller
- Defense ImpairmentT1222: File and Directory Permissions Modification
- Privilege Escalation, Defense ImpairmentT1484: Domain or Tenant Policy Modification
- Defense ImpairmentT1553: Subvert Trust Controls
- Persistence, Defense Impairment, Credential AccessT1556: Modify Authentication Process
About this reference
These security references are maintained by IntegSec, an offensive-security firm whose team holds CISSP, OSCP, and OSCE certifications and has run thousands of penetration tests. Content is kept current as tools, standards, and attack techniques evolve.
Find these issues before an attacker does
TurboPentest runs an agentic AI pentest against your target and reports findings with proof, from $99 per target.
Start a pentest