T1498: Network Denial of Service
Adversaries may perform Network Denial of Service (DoS) attacks to degrade or block the availability of targeted resources to users. Network DoS can be performed by exhausting the network bandwidth services rely on. Example resources include specific websites, email services, DNS, and web-based applications. Adversaries have been observed conducting network DoS attacks for political purposes and to support other malicious activities, including distraction, hacktivism, and extortion.
A Network DoS will occur when the bandwidth capacity of the network connection to a system is exhausted due to the volume of malicious traffic directed at the resource or the network connections and network devices the resource relies on. For example, an adversary may send 10Gbps of traffic to a server that is hosted by a network with a 1Gbps connection to the internet. This traffic can be generated by a single system or multiple systems spread across the internet, which is commonly referred to as a distributed DoS (DDoS).
To perform Network DoS attacks several aspects apply to multiple methods, including IP address spoofing, and botnets.
Adversaries may use the original IP address of an attacking system, or spoof the source IP address to make the attack traffic more difficult to trace back to the attacking system or to enable reflection. This can increase the difficulty defenders have in defending against the attack by reducing or eliminating the effectiveness of filtering by the source address on network defense devices.
For DoS attacks targeting the hosting system directly, see Endpoint Denial of Service.
How it's found
Behavioral Detection of T1498 - Network Denial of Service Across Platforms: Executable or script generating large outbound network traffic targeting remote hosts or known amplification ports Flooding tools like hping3 or nping sending large volumes of packets across multiple ports or IPs
Sub-techniques
T1498.001: Direct Network Flood
Adversaries may attempt to cause a denial of service (DoS) by directly sending a high-volume of network traffic to a target. This DoS attack may also reduce the availability and functionality of the targeted system(s) and network. Direct Network Floods are when one or more systems are used to send a high-volume of network packets towards the targeted service's network. Almost any network protocol may be used for flooding. Stateless protocols such as UDP or ICMP are commonly used but stateful protocols such as TCP can be used as well. Botnets are commonly used to conduct network flooding attacks against networks and services. Large botnets can generate a significant amount of traffic from systems spread across the global Internet. Adversaries may have the resources to build out and control their own botnet infrastructure or may rent time on an existing botnet to conduct an attack. In some of the worst cases for distributed DoS (DDoS), so many systems are used to generate the flood that each one only needs to send out a small amount of traffic to produce enough volume to saturate the target network. In such circumstances, distinguishing DDoS traffic from legitimate clients becomes exceedingly difficult. Botnets have been used in some of the most high-profile DDoS flooding attacks, such as the 2012 series of incidents that targeted major US banks.
T1498.002: Reflection Amplification
Adversaries may attempt to cause a denial of service (DoS) by reflecting a high-volume of network traffic to a target. This type of Network DoS takes advantage of a third-party server intermediary that hosts and will respond to a given spoofed source IP address. This third-party server is commonly termed a reflector. An adversary accomplishes a reflection attack by sending packets to reflectors with the spoofed address of the victim. Similar to Direct Network Floods, more than one system may be used to conduct the attack, or a botnet may be used. Likewise, one or more reflectors may be used to focus traffic on the target. This Network DoS attack may also reduce the availability and functionality of the targeted system(s) and network. Reflection attacks often take advantage of protocols with larger responses than requests in order to amplify their traffic, commonly known as a Reflection Amplification attack. Adversaries may be able to generate an increase in volume of attack traffic that is several orders of magnitude greater than the requests sent to the amplifiers. The extent of this increase will depending upon many variables, such as the protocol in question, the technique used, and the amplifying servers that actually produce the amplification in attack volume. Two prominent protocols that have enabled Reflection Amplification Floods are DNS and NTP, though the use of several others in the wild have been documented. In particular, the memcache protocol showed itself to be a powerful protocol, with amplification sizes up to 51,200 times the requesting packet.
Standards mapping
Where this fits in a TurboPentest engagement
This weakness is not covered by the automated black-box pentest. IntegSec pentesters cover it in a manual engagement.
Frequently asked questions
What is T1498 Network Denial of Service?
Adversaries may perform Network Denial of Service (DoS) attacks to degrade or block the availability of targeted resources to users. Network DoS can be performed by exhausting the network bandwidth services rely on. Example resources include specific websites, email services, DNS, and web-based applications. Adversaries have been observed conducting network DoS attacks for political purposes and to support other malicious activities, including distraction, hacktivism, and extortion. A Network DoS will occur when the bandwidth capacity of the network connection to a system is exhausted due to the volume of malicious traffic directed at the resource or the network connections and network devices the resource relies on. For example, an adversary may send 10Gbps of traffic to a server that is hosted by a network with a 1Gbps connection to the internet. This traffic can be generated by a single system or multiple systems spread across the internet, which is commonly referred to as a distributed DoS (DDoS). To perform Network DoS attacks several aspects apply to multiple methods, including IP address spoofing, and botnets. Adversaries may use the original IP address of an attacking system, or spoof the source IP address to make the attack traffic more difficult to trace back to the attacking system or to enable reflection. This can increase the difficulty defenders have in defending against the attack by reducing or eliminating the effectiveness of filtering by the source address on network defense devices. For DoS attacks targeting the hosting system directly, see Endpoint Denial of Service.
Which tactics does T1498 belong to?
T1498 maps to the Impact tactic.
Does TurboPentest test for Network Denial of Service?
This weakness is not covered by the automated black-box pentest. IntegSec pentesters cover it in a manual engagement.
Related MITRE ATT&CK techniques
About this reference
These security references are maintained by IntegSec, an offensive-security firm whose team holds CISSP, OSCP, and OSCE certifications and has run thousands of penetration tests. Content is kept current as tools, standards, and attack techniques evolve.
Find these issues before an attacker does
TurboPentest runs an agentic AI pentest against your target and reports findings with proof, from $99 per target.
Start a pentest