T1205: Traffic Signaling
Adversaries may use traffic signaling to hide open ports or other malicious functionality used for persistence or command and control. Traffic signaling involves the use of a magic value or sequence that must be sent to a system to trigger a special response, such as opening a closed port or executing a malicious task. This may take the form of sending a series of packets with certain characteristics before a port will be opened that the adversary can use for command and control. Usually this series of packets consists of attempted connections to a predefined sequence of closed ports (i.e. Port Knocking), but can involve unusual flags, specific strings, or other unique characteristics. After the sequence is completed, opening a port may be accomplished by the host-based firewall, but could also be implemented by custom software.
Adversaries may also communicate with an already open port, but the service listening on that port will only respond to commands or trigger other malicious functionality if passed the appropriate magic value(s).
The observation of the signal packets to trigger the communication can be conducted through different methods. One means, originally implemented by Cd00r , is to use the libpcap libraries to sniff for the packets in question. Another method leverages raw sockets, which enables the malware to use ports that are already open for use by other programs.
On network devices, adversaries may use crafted packets to enable Network Device Authentication for standard services offered by the device such as telnet. Such signaling may also be used to open a closed service port such as telnet, or to trigger module modification of malware implants on the device, adding, removing, or changing malicious capabilities. Adversaries may use crafted packets to attempt to connect to one or more (open or closed) ports, but may also attempt to connect to a router interface, broadcast, and network address IP on the same port in order to achieve their goals and objectives. To enable this traffic signaling on embedded devices, adversaries must first achieve and leverage Patch System Image due to the monolithic nature of the architecture.
Adversaries may also use the Wake-on-LAN feature to turn on powered off systems. Wake-on-LAN is a hardware feature that allows a powered down system to be powered on, or woken up, by sending a magic packet to it. Once the system is powered on, it may become a target for lateral movement.
How it's found
Traffic Signaling (Port-knock / magic-packet → firewall or service activation) - T1205: A remote host sends a short sequence of failed connection attempts (RST/ICMP unreachable) to a set of closed ports. Within a brief window the endpoint (a) adds/enables a firewall rule or (b) a sniffer-backed process begins listening or opens a new socket, after which a successful connection occurs. Also detects Wake-on-LAN magic packets seen on local segment. Closed-port knock sequence from a remote IP followed by on-host firewall change (iptables/nftables) or daemon starts listening (socket open) and a successful TCP/UDP connect. Optional detection of libpcap/raw-socket sniffers spawning to watch for secret values. Remote knock sequence followed by PF/socketfilterfw rule update or a background process listening on a new port; then a successful TCP session. Also flags WoL magic packets on local segment. Crafted ‘synful knock’ patterns toward routers/switches (same src hits interface/broadcast/network address on same port in short order) followed by ACL/telnet/SSH enablement or module change. Detect device image/ACL updates then a new mgmt session.
Sub-techniques
T1205.001: Port Knocking
Adversaries may use port knocking to hide open ports used for persistence or command and control. To enable a port, an adversary sends a series of attempted connections to a predefined sequence of closed ports. After the sequence is completed, opening a port is often accomplished by the host based firewall, but could also be implemented by custom software. This technique has been observed both for the dynamic opening of a listening port as well as the initiating of a connection to a listening server on a different system. The observation of the signal packets to trigger the communication can be conducted through different methods. One means, originally implemented by Cd00r , is to use the libpcap libraries to sniff for the packets in question. Another method leverages raw sockets, which enables the malware to use ports that are already open for use by other programs.
T1205.002: Socket Filters
Adversaries may attach filters to a network socket to monitor then activate backdoors used for persistence or command and control. With elevated permissions, adversaries can use features such as the `libpcap` library to open sockets and install filters to allow or disallow certain types of data to come through the socket. The filter may apply to all traffic passing through the specified network interface (or every interface if not specified). When the network interface receives a packet matching the filter criteria, additional actions can be triggered on the host, such as activation of a reverse shell. To establish a connection, an adversary sends a crafted packet to the targeted host that matches the installed filter criteria. Adversaries have used these socket filters to trigger the installation of implants, conduct ping backs, and to invoke command shells. Communication with these socket filters may also be used in conjunction with Protocol Tunneling. Filters can be installed on any Unix-like platform with `libpcap` installed or on Windows hosts using `Winpcap`. Adversaries may use either `libpcap` with `pcap_setfilter` or the standard library function `setsockopt` with `SO_ATTACH_FILTER` options. Since the socket connection is not active until the packet is received, this behavior may be difficult to detect due to the lack of activity on a host, low CPU overhead, and limited visibility into raw socket usage.
Standards mapping
Where this fits in a TurboPentest engagement
This weakness is not covered by the automated black-box pentest. IntegSec pentesters cover it in a manual engagement.
Frequently asked questions
What is T1205 Traffic Signaling?
Adversaries may use traffic signaling to hide open ports or other malicious functionality used for persistence or command and control. Traffic signaling involves the use of a magic value or sequence that must be sent to a system to trigger a special response, such as opening a closed port or executing a malicious task. This may take the form of sending a series of packets with certain characteristics before a port will be opened that the adversary can use for command and control. Usually this series of packets consists of attempted connections to a predefined sequence of closed ports (i.e. Port Knocking), but can involve unusual flags, specific strings, or other unique characteristics. After the sequence is completed, opening a port may be accomplished by the host-based firewall, but could also be implemented by custom software. Adversaries may also communicate with an already open port, but the service listening on that port will only respond to commands or trigger other malicious functionality if passed the appropriate magic value(s). The observation of the signal packets to trigger the communication can be conducted through different methods. One means, originally implemented by Cd00r , is to use the libpcap libraries to sniff for the packets in question. Another method leverages raw sockets, which enables the malware to use ports that are already open for use by other programs. On network devices, adversaries may use crafted packets to enable Network Device Authentication for standard services offered by the device such as telnet. Such signaling may also be used to open a closed service port such as telnet, or to trigger module modification of malware implants on the device, adding, removing, or changing malicious capabilities. Adversaries may use crafted packets to attempt to connect to one or more (open or closed) ports, but may also attempt to connect to a router interface, broadcast, and network address IP on the same port in order to achieve their goals and objectives. To enable this traffic signaling on embedded devices, adversaries must first achieve and leverage Patch System Image due to the monolithic nature of the architecture. Adversaries may also use the Wake-on-LAN feature to turn on powered off systems. Wake-on-LAN is a hardware feature that allows a powered down system to be powered on, or woken up, by sending a magic packet to it. Once the system is powered on, it may become a target for lateral movement.
Which tactics does T1205 belong to?
T1205 maps to the Persistence, Stealth, Command and Control tactics.
Does TurboPentest test for Traffic Signaling?
This weakness is not covered by the automated black-box pentest. IntegSec pentesters cover it in a manual engagement.
Related MITRE ATT&CK techniques
- Persistence, Privilege EscalationT1037: Boot or Logon Initialization Scripts
- Execution, Persistence, Privilege EscalationT1053: Scheduled Task/Job
- Initial Access, Persistence, Privilege Escalation, StealthT1078: Valid Accounts
- Persistence, Privilege EscalationT1098: Account Manipulation
- Persistence, Defense ImpairmentT1112: Modify Registry
- Initial Access, PersistenceT1133: External Remote Services
About this reference
These security references are maintained by IntegSec, an offensive-security firm whose team holds CISSP, OSCP, and OSCE certifications and has run thousands of penetration tests. Content is kept current as tools, standards, and attack techniques evolve.
Find these issues before an attacker does
TurboPentest runs an agentic AI pentest against your target and reports findings with proof, from $99 per target.
Start a pentest